2. Hydraulic performance
Interactive graphics: Point on your preferred design flow and pressure. The curve shows up to 4.0m pressure head. For capacity at higher pressure heights, contact MFT. All models are listed in the table below.
FluidVertic STD kapasitet 2024-10
3. Models overview
Remarks: Water flows (l/s) given in the table below apply to a 1.2 m pressure head - Q(1,2).(height above center outlet vortex valve). For other pressure heads, see hydraulic curves above. PVC socket is not included in the delivery. All measurements given in [mm] unless otherwise specified.
Merk: FluidVertic has submerged inlets, which contribute to increased operational reliability. In order to reduce the risk of clogging, the system should be designed so that any larger particles do NOT reach the inlet of the vortex chamber (e.g. submerged outlet from upstream manhole, scum board infront of vortex chamber, etc.). This is particularly important for vortex chambers with a flow cross-section (DN) below 50 mm.
4. Accessories
Mounting plates
Produktnr | Dimensjon (utløp virvelkammer) øD, [mm] | A [mm] | B [mm] | Vekt [kg] |
---|---|---|---|---|
MP-PUR110 | 110 | 300 | 300 | 0,9 |
MP-PUR160 | 160 | 350 | 350 | 1,1 |
Filler pieces
(les mer om MFT Fyllstykker)
Produktnr | Dimensjon (utløp virvelkammer) øD, [mm] | Kumdiameter (fra-til) [mm] | A [mm] | B [mm] | Vekt [kg] |
---|---|---|---|---|---|
FS-PUR110-8/24 | 110 | 800-2400 | 300 | 300 | 1,4 |
FS-PUR160-8/24 | 160 | 800-2400 | 350 | 350 | 2,3 |
Sliding frame
Produktnr | Dimensjon (utløp virvelkammer) øD | C |
---|---|---|
VGD-110 | 110 | tilpasses |
VGD-160 | 160 | tilpasses |
Integrated overflow
Produktnr | Beskrivelse | Dimensjon (utløp virvelkammer) øD | Materiale | Vekt [kg] |
---|---|---|---|---|
T-MR110 | T-stykke | 110 | PVC | 0,5 |
T-MR160 | T-stykke | 160 | PUR | 1,1 |
IO-P110 | Vertikal overløpsrør, PVC, inkl klammer. | 110 | PVC | |
IO-P160 | Vertikal overløpsrør, PVC, inkl klammer. | 160 | PVC |